Blastrac BDC3140 - Technical Specifications

Operating manual BDC3140 DBP/LPP 6/12
info@blastrac.eu
GB
Technical specications
Parameter Units BDC3140 DBP/LPP
Voltage / frequency V/Hz 230/60 400/50 440/60
Power rating kW 4,6 4 6,3
Noise level dB(A) 72 71 80
Peak noise* dB(A) 75 82 81
Protection IP 55 55 55
Insulation Class F F F
Container capacity L 100 100 100
Inlet (diameter) mm 70 70 70
Max vacuum hPa - mbar 226 - 226 294 - 294 206 - 206
Maximum air ow rate (with hose, length: 3 m, diameter: 76 mm) m
3
/h - L/min’ 462 - 7700 450 - 7500 550 - 9250
Main lter surface m
2
15 15 15
Upstream absolute “H” lter surface - HEPA 14 according to
MPPS method (EN 1822)
m
2
3,5 3,5 3,5
* When the compressor is operating
Parameter Units BDC3140 DBP/LPP
Voltage / frequency V/Hz 230/60 400/50 440/60
Power rating kW 4,6 4 6,3
Noise level @ 3’3” (1 meter) dB(A) 72 71 80
Peak noise* dB(A) 75 82 81
Protection IP 55 55 55
Motor insulation Class F F F
Container capacity
Gallons/
litres
26 - 100 26 - 100 26 - 100
Inlet (diameter) Inches 3 3 3
Max vacuum Inches H
2
O 9.06 11.78 8.21
Max air ow rate cfm 272 265 327
Main lter surface Sq. ft 162 162 162
Absolute lter surface (HEPA optional) Sq. ft 38 38 38
Cable length ft 30 30 30
HEPA lter efciency
MPPS
tested
99.995% @
0.18 micron
99.995% @
0.18 micron
99.995% @
0.18 micron
* When the compressor is operating