Need help?Do you have a question about the Blastrac BMR-25P and is the answer not in the manual?
Key safety measures include keeping unauthorized personnel away, ensuring the treatment surface is clear, managing cables, driving direction on ramps, and avoiding drugs/alcohol.
Regulations mandate not altering safety devices, keeping distance from the machine, consulting electricians for electrical issues, and proper attire like tying hair and wearing gloves/masks.
Instructions include parking on a level surface, turning the key off when parked, and using appropriate lifting equipment based on the machine's weight (3205lbs/1451kg).
DANGER: Engine exhaust contains poisonous carbon monoxide. Use only with adequate ventilation. Warning: Engine and hydraulic components can reach high temperatures causing burns.
Before use, check shifter in neutral, secure hydraulic connections, verify safety/operating functions, and ensure no loose nuts or bolts.
Sit in the seat, release emergency switch, turn ignition, set RPM to 3600 using throttle, and monitor RPM/speed gauges.
Use the shifter (1) for forward/reverse and the steering wheel (2) to control direction. Driving speed depends on shifter position.
Details operation of buttons for lowering/raising Blasthead, engaging/disengaging clutch, and opening/closing shot valve.
Step-by-step guide for startup (run up RPM, lower head, engage clutch, accelerate, open shot valve) and shutdown (close shot valve, clutch off, idle, turn key off).
Daily checks include grease, oil levels, blasthead wear, safety devices, seals. Periodic tasks involve changing engine/air filters and hydraulic oil/filter.
Check oil level via indicator on the tank. Replace oil and filter annually or every 150 hours, ensuring power is disconnected.
Steps to remove the blasthead involve disconnecting wiring, removing guards, belts, pins, and rolling the head away carefully.
Ensure front/side seals contact the ground, brush is 1/4" from surface. Loosen nuts, adjust seals, and retighten.
Adjust vacuum slide plate on dust collector to control shot consumption: slide right to consume more, left to consume less.
General| Model | BMR-25P |
|---|---|
| Category | Industrial Equipment |
| Power Source | Propane |
| Working Width | 25 inches |
| Dust Extraction | Optional |
| Applications | Concrete |
| Type | Ride-on Scraper |
To Next Page
