EN
AUDIO (KLANG):
In this submenu you can adjust the sound individually.
Note: BASS (TIEFEN) and TREBLE (HOEHEN) can be
adjusted separately for each source.
BASS (TIEFEN):
Amplifies or reduces low frequency range.
TREBLE (HOEHEN):
Amplifies or reduces high frequency range.
BAL (BALANCE):
Adjusts the balance of the sound.
FADER:
Adjusts the audio signal of the front/rear speakers.
LOUD:
Loudness On/Off (bass enhance)
EQ:
Enable preset tone styles.
Note:
When the tone styles is on, the manual
setting of BASS (TIEFEN)/TREBLE (HÖHEN) is off.
SUB-OUT:
Adjust the output level (GAIN) and cut-off
frequency (FREQ) of the subwoofer output.
DISPLAY (ANZEIGE):
In this submenu, you can make settings for the display.
DIM MAN/ AUTO:
Toggling between the display brightness settings
manually/automatically.
AUTO: The ILLUMINATION input (see
"INSTALLATION/CONNECTIONS") automatically
toggles the display brightness between the preset
DAY (TAG) and NIGHT (NACHT) values depending
on the lighting in the vehicle.
MAN: pressing the DIS button for 2 seconds
toggles between preset DAY (TAG) and NIGHT
(NACHT) values.
DAY (TAG):
A preset display brightness during the day.
NIGHT (NACHT):
A preset display brightness at night.
SCROLL:
Scrolls the displayed content if it is longer than can
be displayed at a time. Options: Scrolling through
the new information once (1X) or always (ON (AN).
LANGUAGE (SPRACHE):
Select the menu language of the device. Available
languages: DEUTSCH/ENGLISH.
COLOR (FARBE):
Select the colour of the display and buttons (7
colours are available).
VOLUME (LAUTSTAERKE):
In this submenu, you can make volume settings for the
device.
ON VOLUME (AN LAUTST):
Select whether the unit is to restart with the last
used LAST VOLUME (LETZTE LAUTSTÄRKE) or
with a preset value.
Note: The startup volume is always limited to
max. 30.
TA VOL:
Set the volume of traffic announcements. If the
volume of the active traffic announcement is
adjusted, this setting will be updated or
overwritten.
HF VOL:
Set the volume of the hands-free system.
If the volume is adjusted during a phone call, this
setting will be updated or overwritten.
BEEP:
Setting the audible feedback (beep) when a key is
pressed.
Note: Saving a station is always indicated by a
beeping sound, even when the BEEP function is set
to OFF (AUS).
CLOCK (UHR):
In this submenu, you can make settings for the clock. See
also "CLOCK".
CLOCK (UHR):
Enabling/disabling the time display when the unit is
turned off. When the unit is turned off and the
ignition is turned on, the display shows the clock.
MODUS:
Toggle between the 12/24 hour displays.
SET 00:00:
Manual time setting.
Rotate the button/knob counter clockwise: Minutes
setting. Rotate the button/knob clockwise: Hours
setting.
Note: If RDSCLOCK (RDSUHR) is active, the time
set manually is overwritten.
RDSCLOCK (RDSUHR):
Activating automatic time settings using the radio's
RDS data signal.
To Next Page
Loading...
Need help?
General
