22
Radio mode
Note:
For the tuner region "EUROPE": In the FM
waveband, the next station of the broadcast-
ing network is automatically tuned into if the
RDS function is switched on.
Starting station seek tuning
Press the button
/
7
for approx. 2 sec-
onds to start station seek tuning.
The radio tunes into the next receivable sta-
tion.
Notes:
For the tuner region "EUROPE": In the FM
waveband, only tra c information stations
are tuned into if the priority for tra c infor-
mation ( ) is switched on.
The sensitivity of seek tuning can be ad-
justed (see the chapter "User settings",
section "Performing settings in the user
menu", menu item "SENS").
Storing stations/Calling stored
stations
Select the desired memory bank.
If necessary, set the desired station.
Press the station button 1 - 5
:
for approx.
2 seconds to store the current station under
the button.
- or -
Brie y press the station button 1 - 5
:
to call
up the stored station.
Scanning stations
The scan function is used to scan every receivable
station of the current waveband.
Press the MENU/OK button
2
for approx.
2 seconds to start the scan, or long to con-
tinue playing the currently set station.
During the scan, the display alternately dis-
plays "SCAN" and the current frequency as
well as memory bank or station name.
쏅
•
•
쏅
쏅
쏅
쏅
쏅
Note:
For radio mode, you can adjust the scan time
for each station (see the ch. "User settings",
section "Performing settings in the user
menu", "SCAN TIME" menu item).
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search for
and store the 5 FM stations o ering the strongest
reception in the region in one memory bank, Any
previously stored stations in this memory bank are
deleted in the process.
In the tuner regions "EUROPE" and "THAI", you
can store 5 FM stations in the FMT memory bank
with Travelstore. In the tuner regions "USA" and
"S AMERICA", you can also store 5 AM stations in
the AMT memory bank.
Select a memory bank of the desired wave-
band, e.g. FM1 or AM.
Press the button
/
7
for approx. 2 sec-
onds.
The tuner starts the automatic station seek
tuning; the display shows "FM TSTORE" or
"AM TSTORE". After the storing is completed,
the radio plays the station at memory location
1 of the FMT or AMT level.
Note:
For the tuner region "EUROPE": If the priority
for tra c information is switched on ( ),
only tra c information stations are stored.
Con guring the display
Press the DISP/ESC button
<
to change be-
tween these two displays:
Display Meaning
ABCDEF
or
FM1 102.90
Station name
or
memory bank/frequency
FM1 11:32 Memory bank/time
쏅
쏅
쏅
02_Atlanta110_gb.indd 2202_Atlanta110_gb.indd 22 15.11.2010 16:19:33 Uhr15.11.2010 16:19:33 Uhr
To Next Page
Loading...
