28
Factory settings | Useful information | Technical data
Factory settings
Factory settings in the user menu:
ON VOLUME LAST VOL
MUTE LVL 0
SENS HIGH
SCAN TIME 10
BEEP ON
DIM DAY 15
DIM NIGHT 12
12H/24H MODE 24H
CLOCKSET 12:00
TA VOL 20
RDS ON
REG* ON
TRAF* OFF
* Only in tuner region "EUROPE"
You can restore the original factory settings of the
car sound system:
Brie y press the MENU/OK button
2
to
open the menu.
Press the button
/
7
repeatedly until
the "NORMSET" menu item is selected.
Press and hold down the MENU/OK button
2
for longer than 4 seconds.
"NORM ON" brie y appears on the display.
The car sound system automatically switches
o and on again with the factory settings.
Note:
If you press the MENU/OK button
2
for less
than 4 seconds, "NORM OFF" appears on the
display and the current settings are retained.
쏅
쏅
쏅
Useful information
Warranty
We provide a manufacturer's warranty for prod-
ucts bought within the European Union. For de-
vices purchased outside the European Union, the
warranty terms issued by our respective responsi-
ble domestic agency are valid. The warranty terms
can be called up under www.blaupunkt.com.
Service
In some countries, Blaupunkt o ers a repair and
pick-up service.
Information about the availability of this service
in your country can be found at www.blaupunkt.
com.
If you want to take advantage of this service, you
may request a pick-up service for your car sound
system via the Internet.
Technical data
Voltage supply
Operating voltage: 10.5 - 14.4 V
Current consumption
In operation: 10 A
10 sec. after switch-o : < 3.5 mA
Ampli er
Output power: 4 x 22 watts sine at
14.4
V at 4 ohms.
4 x 50 watts max. power
Tuner
Wavebands in Europe/Thailand:
FM: 87.5 - 108 MHz
AM (MW): 531 - 1,602 kHz
LW (Europe only): 153 - 279 kHz
02_Atlanta110_gb.indd 2802_Atlanta110_gb.indd 28 15.11.2010 16:19:35 Uhr15.11.2010 16:19:35 Uhr
To Next Page
Loading...
