Blaupunkt AUS440 - Balance & Fader Control; Visual Control; ON SCREEN - SETUP OPERATION

1
2
Balance & Fader Control
1. Touch to shift to next setting mode.
2. Hold & slide to set the output level on left I right I front I
rear speaker.
Visual Control
1. Touch to shift to next setting mode.
2. Touch repeatedly to select the desired setting mode on
brightness, contrast, hue, saturation and sharpness.
3. At the desired setting mode, hold & slide to adjust the level.
ON SCREEN -SETUP OPERATION
At MAIN MENU, touch 'SETUP" icon on screen to shift screen to SETUP MENU for various
system setups.
SYSTEM SETUP
SYSTEM SETUP MENU
SYSTEM SETUP MENU
[ 13]