TURNING THE APPLIANCE ON
Plug into the mains socket, then the appliance is standby. Press the
button to make the appliance turn on. The last function active when it was
turned o will appear.
Never turn the air conditioner o by unplugging from the
mains. Always press the button , then wait for a few minutes
before unplugging. This allows the appliance to perform a
cycle of checks to verifv operation.
COOL MODE
Ideal for hot muggy weather when you need to
cooling and dehumidify the room.
To set this mode correctly:
• Press the M button a number of times until the
symbol appears.
• Select the target temperature l8~34°C (64~90°F)
by pressing the /\ or V button until the correspon-
ding value is displayed.
• Select the required fan speed by pressing the button. Three speeds
are available:
Maximum speed: to achieve the target temperature as rapidly as
possible.
Medium speed: reduces noise levels but stili maintains a good
level of comfort.
Low speed: for silent operation.
To Next Page
Loading...
Need help?
General
