The Blaupunkt Ice Cube Air Cooler, model number 368417, is a personal air cooling device designed for domestic use. It operates using a USB power source and can be used with or without water, though optimal cooling is achieved by filling its water tanks.
Function Description:
The Ice Cube Air Cooler provides a localized cool breeze for small spaces. It features adjustable cooling speeds, with three settings available, indicated by lights. The device also includes mood lights with seven selectable colors. Airflow direction can be manually adjusted via horizontal grills on the front. The core cooling mechanism involves a wet filter block and water tanks. For enhanced cooling, the water tanks and filter block can be frozen prior to use. The device is not designed to significantly reduce room temperature but rather to offer personal cooling.
Important Technical Specifications:
- Product Code: EH3139V2
- Input: DC 5 V
- Output: 7 W
- Water Tank Capacity: 600 ml
- Power Source: USB (can be used with a mains to USB adaptor)
Usage Features:
- Getting Started: Remove the air cooler from its packaging. The box includes the Ice Cube Air Cooler main unit, a USB cable, a mains to USB adaptor, and an instruction manual.
- Power On/Off: Press the power button to turn the air cooler on or off.
- Cooling Speed Adjustment: Press the 'COOL' button to cycle through three cooling speeds. Indicator lights will show the selected speed.
- Mood Light Activation: Press the 'LIGHT' button to turn on the mood light. Repeatedly pressing 'LIGHT' cycles through seven colors.
- Airflow Direction: Manually adjust the horizontal grills on the front of the air cooler to regulate airflow.
- Water Tank Filling (for optimum cooling):
- Ensure the air cooler is switched off and unplugged.
- Open water tank access doors and pull tanks up and away.
- Remove the filter block by lifting and sliding it sideways. Run it under cool, clean water until fully wet, then shake off excess and replace.
- Remove water tanks, unscrew caps, and fill to the brim with cool, clean water. Replace caps and slide tanks back into position. Valves in the caps will release water into the reservoir.
- Close water tank access doors.
- Enhanced Cooling (Freezing Water Tanks/Filter Block):
- Fill water tanks to the indicated line and place upright in the freezer for 8 hours until fully frozen. Top up with cool, clean water before inserting into the air cooler.
- The wet filter block can also be placed in the freezer with the water tanks for 8 hours until frozen.
- Caution: Do not freeze water tanks with caps on, as this could damage valves and tanks. Do not fill the air cooler with any liquid other than cool, clean water or use additives.
- Important Notes during Use:
- Always remove excess water and allow the air cooler to dry after each use to prevent limescale and bacteria buildup.
- Do not lift the air cooler by the front panel when positioning.
- Keep the air cooler level when filled with water to avoid spills, as the water reservoir is in the base.
- Water droplets on or around the tanks are normal; wipe away with an absorbent cloth.
- Storage: Drain water tanks and allow the air cooler to cool and dry before storing in a cool, dry place. Coil the power cable carefully to prevent damage.
Maintenance Features:
- General Cleaning:
- Always unplug the air cooler and allow it to cool completely before cleaning.
- Wipe the exterior with a soft, damp, lint-free cloth and dry thoroughly.
- Do not immerse the air cooler in water or any other liquid.
- Do not use flammable liquid, abrasive cleaning solvents, polishes, or scouring pads.
- Water Tank Draining: After each use, open access doors, pull out water tanks, unscrew caps, and tip away any excess water. Shake to remove excess and leave to dry with caps off.
- Filter Block Cleaning:
- Lift the filter block up and slide it out from one side of the main unit.
- Remove loose fibers by hand and rinse with cool, clean water.
- Allow the filter block to air dry if not using immediately.
- Alternatively, place the filter in a dishwasher at 35 °C for approximately 35 minutes, then air-dry.
- Internal Cleaning: Before replacing water tanks and filter block, wipe the inside of the air cooler with an absorbent cloth to remove any excess water from the water reservoir. Limescale deposits can be removed with a soft, damp cloth and mild detergent.
- Mould/Musty Smell Treatment: If mould or a musty smell occurs, remove the filter block and fully immerse it in a solution of equal parts water and white vinegar. Soak for 45-60 minutes, then rinse thoroughly in warm water and air-dry.
- Filter Replacement: It is advised to replace the filter every 6–12 months. Contact customer service for ordering a new filter.
Safety Instructions:
- Read all instructions carefully and retain for future reference.
- Check that the voltage on the rating plate matches the local network voltage.
- Children under 3 years should be continuously supervised if near the product.
- Children aged 3-8 years should not plug in, regulate, clean, or perform user maintenance.
- Children over 8 years and individuals with reduced physical, sensory, or mental capabilities can use the appliance if supervised and instructed on safe use.
- Children should not perform cleaning or user maintenance unless over 8 years and supervised.
- This is not a toy; children should be supervised to prevent play with the product.
- Always unplug the product and allow it to cool before cleaning or maintenance.
- Unplugging is crucial as normal voltage is present when connected to the electrical source.
- The product contains no user-serviceable parts. Repairs should only be carried out by a qualified electrician.
- Keep the product and its power supply cord out of reach of children and away from heat or sharp edges.
- Keep the power supply cord away from hot parts of the product.
- Keep hands, fingers, hair, and loose clothing away from rotating parts.
- Do not immerse the product in water or any other liquid.
- Do not operate with wet hands.
- Do not leave unattended when connected to power or in use.
- Do not remove the product from power by pulling the cord; switch off and remove the plug by hand.
- Do not use for extended periods or overnight.
- Do not use for anything other than its intended use.
- Do not use outdoors.
- Do not move the product while in use.
- Do not shake or cover the product.
- Do not put objects into openings.
- Do not clean with abrasive chemicals, insecticides, or chemical solvents.
- Always use on a flat, stable surface.
- Use of an extension cord is not recommended.
- Should not be operated by external timers or separate remote control systems (other than supplied).
- Intended for domestic use only, not commercial.
- Only use with the provided power supply unit.
- WARNING: If a strong odor is emitted, turn off and unplug immediately.
- If the product falls or is pushed over with water in the tank, unplug immediately, right it, and dry thoroughly before reuse.
Electrical Information (for fixed mains plug):
- Supplied with a BS1363/A 13 amp plug. If unsuitable, replace with an appropriate plug.
- If the plug is damaged or needs replacement, follow wiring instructions.
- Dispose of removed plugs immediately; do not plug into a supply socket.
- If the fuse needs replacement, it must be of the same rating and ASTA approved to BS1362.
- If the plug is changed, a fuse of the appropriate rating must be fitted.
- If a fuse in a molded plug is replaced, the fuse cover must be refitted.
Wiring Instructions:
- 2-Core Plug (Class II appliance, no earth connection):
- Blue wire connects to terminal N (or black).
- Brown wire connects to terminal L (or red).
- Do not connect any wire to the earth terminal.
- 3-Core Plug (earthed appliance):
- Green and yellow wire connects to terminal E (or earth symbol, or green/yellow).
- Blue wire connects to terminal N (or black).
- Brown wire connects to terminal L (or red).
- Ensure the outer sheath of the cable is held firmly by the cable clamp.
- Never open the power adapter due to electric shock risk.
- Only use the power adapter supplied with the product.
- Always connect the power adapter to the product before connecting to the mains supply.
- The power adapter must be used indoors only and not subjected to damp conditions.
- The power adapter has no user-serviceable parts.
Troubleshooting:
- Air cooler not powering on:
- Not connected to power supply: Connect and press power button.
- Portable power source battery depleted: Check battery, recharge, connect, and press power button.
- Insufficient air blowing:
- Cooling speed too low: Select a higher speed using 'COOL' button.
- Filter block blocked: Clean filter block as per 'Care and Maintenance' instructions.
- Air cooler not cooling air:
- Water tanks not filled enough: Fill water tanks to the brim.
- Water tanks not inserted correctly: Remove, reinsert, ensuring valve opens and releases water.
- Water tanks not frozen long enough: Fill to indicated line, freeze for approx. 8 hours.
- Ambient humidity high: Air cooler will not cool air effectively due to high humidity.
Need help?
General
To Next Page