7
(Fixed Mains Plug Only)
The mains lead supplied with this product is tted with a BS1363/A 13 amp plug. If it is not suitable for
your supply sockets it must be replaced with an appropriate plug.
If the plug becomes damaged and/or needs to be replaced please follow the wiring instructions on
the next page.
The plug removed must be disposed of immediately. It must not be plugged into a supply socket as
this will be an electrical hazard.
If the fuse needs to be replaced it must be of the same rating and ASTA approved to BS1362. If the
plug is changed, a fuse of the appropriate rating must be tted in the plug, adapter or at the
distribution board. If the fuse in a moulded plug is replaced, the fuse cover must be retted before the
application can be used.
ELECTRICAL INFORMATION
The supply cable will be either 2-core or 3-core. Follow the appropriate wiring instructions shown. In
both cases ensure that the outer sheath of the cable is held rmly in place by the cable clamp.
WIRING INSTRUCTIONS
(Power adapters only)
Never open the power adapter, you risk getting an electric shock. Only use the power adapter that is
supplied with your product. You must always connect the power adapter to the product before
connecting to the mains power supply. The power adapter must be used indoors only, and must not
be subjected to damp conditions. The power adapter does not have any user serviceable parts.
ELECTRICAL INFORMATION
To Next Page
Loading...
Need help?
General
