What to do if my Blaupunkt A1414L shows error E4?
If your Blaupunkt Air Conditioner displays error code E4, it indicates that the water plate is full. To resolve this, pull out the rubber stopper located at the bottom of the appliance to drain the water.
General| Brand | Blaupunkt |
|---|---|
| Model | A1414L |
| Category | Air Conditioner |
| Language | English |
Key safety warnings and cautions for installation, operation, and storage of the appliance.
Guidelines for safe transport, marking, and storage of the portable air conditioner.
Steps to follow for initial setup and efficient operation of the air conditioner.
Instructions on how to safely unpack the portable air conditioner and its components.
Diagram and list identifying all parts of the portable air conditioner.
Step-by-step guide for installing the hot air outlet on the appliance.
Instructions for window kit installation and preparing the appliance for heating mode.
Description and icons of the appliance's control panel buttons and display.
Explanation of Cooling, Dehumidifying, and Heating modes and their indicators.
How to adjust temperature, set the timer, and change fan speed using the control panel.
Detailed explanation of the Auto-On/Auto-Off timer and Sleep mode functions.
How to use the Sleep mode and control the air vent swing function.
Information on standby mode indicators and timer scale.
Instructions for setting Auto-Off and Auto-On timers and their cancellation.
Using Sleep mode in different settings and switching between Celsius/Fahrenheit.
Explanation of Compressor Protection, Defrost Protection, and Water Full Protection.
Details on error codes (E1, E2, E4) indicating thermistor or water tank issues.
Identification and description of buttons and functions on the remote control.
Information on managing condensation and the E4 error for a full water tank.
Instructions for cleaning air filters, condenser, and plastic case, plus power supply checks.
Recommendations for placing the appliance and important notes on its operation.
Precautions and procedures for servicing systems with flammable refrigerants.
Detailed safety measures including fire extinguishers, ignition sources, and ventilation during servicing.
Procedures for checking electrical components and ensuring safety during repair and maintenance.
Guidelines for repairing sealed components and intrinsically safe parts.
Checks for cabling condition and methods for detecting flammable refrigerant leaks.
Procedures for removing, purging, and evacuating refrigerant from the system.
Steps for safely decommissioning the appliance and handling refrigerants.
Requirements for labelling decommissioned equipment and using recovery cylinders.
Details on recovery equipment, procedures, and fuse specifications.
Table detailing error codes (E1, E2, E4), their causes, and solutions.
Key technical data including model, power, capacity, dimensions, and refrigerant.
Explanation of the alphanumeric components that make up the product's model code.
To Next Page