www.blaupunkt.com
BAC-PO-1414-Q11L
23
IMPORTANT MESSAGES
The appliance evaporates and distributes condensation through the exhaust hose.
1. In COOLING mode, the drain pipe does not need to be installed. Ensure the rubber cap
locked on the drain hole when the appliance is in operation.
2. In HEATING mode, pull out the rubber cap to install the drain pipe to ensure heating
efficiency.
3. In DEHUMIDIFYING mode, pull out the rubber cap to install the drain pipe, then
remove the exhaust hose to ensure dehumidifying efficiency.
※
When the water tank is full, the < > display will show <E4> on screen. Remove
the rubber cap of the bottom drain hole t o release the water. After draining, press the
power button to restart the appliance.
To Next Page
Loading...
Need help?
General
