www.blaupunkt.com
BAC-PO-1414-Q11L
17
a. Rotate the < > dial counter-clockwise direction to change the speed from
→→→
Auto<AU)> High<F3> Mid.<F2> Low<F1>.
b. Rotate the < > dial counter-clockwise direction to change the speed from
→→→
Auto<AU)> High<F3> Mid.<F2> Low<F1>.
c. In COOLING mode, fan speeds can be adjusted from Low, Mid, and High to
Auto. The < > display will show <F1>, <F2>, <F3> and <AU> on the
screen.
d. The default fan speed is medium<F2>.
(5) TIMER (Auto-On/Auto-Off) :
a. Press the < > key to activate the timer. The < > indicator will light on.
Press the < > key again to cancel the setting. The < > indicator will
light off.
b. While the appliance is in use, press the < > key and rotate the < > dial
to configure Auto-Off from 0-24 hours.
c. While the appliance is on standby, press the < > key and rotate the < >
dial to configure Auto-On from 0-24 hours.
d. To configure the TIMER, rotate the < > dial clockwise/counter-clockwise to
adjust the value by +1h/-1h per scale.
e. During TIMER, press and hold the < > key for 1second to increase the time
continuously.
(6) SLEEP (SLEEP Mode Key) :
a. SLEEP function in COOLING mode:
To Next Page
Loading...
