www.blaupunkt.com
BAC-PO-1414-Q11L
18
The < > indicator will light on.
The temperature increases by 1 /2 after an hour and 2 /4 after
2 hours. After which, the temperature will remain unchanged.
b. SLEEP function in HEATING mode:
The < > indicator will light on.
The temperature decreases by 1 /2 after an hour and decreases by
2/ 4 after 2 hours. After which, the temperature will remain
unchanged.
c. The SLEEP function is disabled in DEHUMIDIFYING mode.
(7) SWING (Vent Auto-Swing) :
a. The < > indicator will light on/off when Auto-Swing is enabled/disabled.
b. The appliance defaults to enabled Auto-Swing when powered on.
c. Auto-Swing can be configured through either the appliance or the remote
control.
d. The air vent defaults back to the center when the appliance is turned off.
e. Auto-Swing is disabled if the appliance is in neither HEATING nor
DEHUMIDIFYING mode.
II. STANDBY Mode:
In standby mode, only the < > indicator and < > light will turn on in low
brightness.
III. TIMER Mode:
(1) TIMER scale: from 0-24 hours.
To Next Page
Loading...
