5
STEP 3
Using the Ice Cube Air Cooler
STEP 1: Plug in and switch on the air cooler at the desired power supply. Press the power button to turn
on the air cooler.
STEP 2: The desired cooling speed can be selected by pressing ‘COOL’. Cycle through the speeds
numbered 1–3, 3 being the strongest cooling speed. The indicator lights will show the speed selected.
STEP 3: Turn on the mood light by pushing ‘LIGHT’. Cycle through the seven colours by repeatedly
pressing ‘LIGHT’ until the desired colour setting has been selected.
STEP 4: To regulate the direction of the airow, manually adjust the horizontal grills on the front of the
air cooler.
STEP 5: Turn off the air cooler by pressing the power button.
Note: Always remove the excess water and allow the air cooler to dry after each use to avoid a build-up
of lime scale and bacteria
The air cooler is not designed to signicantly reduce the room temperature but will provide a localised
cool breeze for a small space.
When positioning the air cooler, do not lift it by the front panel.
Keep the air cooler level when lled with water to avoid spills. This is due to the water reservoir which is
located in the base of the unit.
It is normal to see water droplets form on or around the tanks. This is no cause for concern.
Simply wipe away the droplets with an absorbent cloth.
STORAGE
Drain the water tanks and allow the air cooler to cool before storing in a cool, dry place.
Carefully coil the power cable to avoid damage during storage.
To Next Page
Loading...
Need help?
General
