6
CORRECT NICORRED
FROM THE CENTRE TO THE EDGE
5
6
4. Cleaning a disc
o Should the disc become soiled, wipe off dust, dirt and fingerprints with a soft cloth.
o The disc should be cleaned by wiping in a straight line from the center to the edge.
o Never use benzene, thinners, record cleaner fluid or anti-static spray.
o Be sure to keep the CD compartment door closed when not in use to keep it clean from
dust and other contaminants.
o Do not touch the lens.
ERP2 (Energy Related Products) note:
This product with ECO design complies with the stage 2 requirement of Commission Regulation( EC) NO.
1275/2008 implementing Directive 2009/125/EC regard to standby and off mode electric power
consumption of electronic household and office equipment. After without any audio input, the device 60 minutes
will automatically switch into standby mode. Follow up the instruction manual to resume the operation.
Please note that low volume setting in the audio source may be recognized as “ no audio signal” “ this will affect
the capability of signal detection from the device and can also originate an automatic switch into standby mode.
If this happens please reactivate the audio signal transmission or increase the volume setting on the audio source
player( mp3 player etc.), in order to resume playback , please contact the local service center if the problem
remains.
BB20BT
To Next Page
Loading...
Need help?
General
