12
INSTALLATION BLUEBOT APP
enter the password and
Press on the 'Go to
connect' button in the
bottom of your screen.
Select the 'SmartLife
xxx' network from the
list and return to the
Bluebot app.
Your robot will now
connect to the App.
7 8
9
11 12
Select the
BLUEBOT PRECISION PLUS
After your registration, make sure the robot is removed
from it's charging station. Turn on your robot by pressing
the "On button". After that is done, long press the
recharge button for more than 3 seconds until Wi-Fi
indicator starts ashing.
10
Tick "Conrm indicator blinks
slowly" when applicable and
press ‘Next’.
To Next Page
Loading...
Need help?
General
