16
MORE OPTIONS
Timer*
Set a timer to program the robot to clean at a certain time or day.
Manual
Control the robot manually with the remote control or use the Bluebot app
on your phone as a remote control.
Find robot
Tap this button when you lost your robot and your robot will tell you where
it is.
Map management*
Use this function to manage your maps (5 max.).
Water regulation
Control the water regulation and choose “Low”, “Medium” or “High”. This will
regulate how wet the mop will become when using the robot including
the 2 in 1 electric- controlled water tank.
Auto Boost*
Auto Boost will increase suction power when the robot gets more friction.
This is designed to increase suction on carpets.
Custom mode*
So the robot can remember per area what route to use for cleaning.
Record*
View all your previous vacuum cleaning records. You can see how many m2
has been cleaned and the time it took. Here you can also load previously
saved maps. Ideal when cleaning different area’s (upper floor for instance).
Voice and volume
Setup your language and change the volume.
Do not disturb mode
Here you can schedule an do not disturb time period.
Consumables and Maintenance*
Here you will find an overview of consumables and indicates when
consumables need to be replaced or Entretien is required.
More info*
Here you will find network and robot information
Set wall / Resctricted Area*
Use this function to create no-go zones within the area that you are
cleaning. You can draw virtual walls that blocks the robot from crossing. Or
you create a restricted area for either vacuuming or mopping.
* Via Bluebot app only
6. CLEANING SETTINGS
To Next Page
Loading...
Need help?
General
