21
EN
MAINTENANCE
MOPPING MODULE | 2 IN 1 ELECTRICALLY
CONTROLLED WATER TANK
1 Remove the mop, pour the water out of the water tank after each use.
2 Clean the mop (by hand or in a washing machine; max 40˚C), dry
naturally, do not tumble dry the mop. Dry the water tank naturally by air.
SENSOR | REGULARY CLEANING
Clean the sensors with a soft, dry mop, including:
1 Three anti-dropping sensors at the bottom of the robot.
2 Electric shock protector and the pins to connect with the charging
station at the bottom of the robot (please cut the power o during
cleaning)
3 Signal transmission area of charging station.
Anti-drop sensor
To Next Page
Loading...
