35
EN
Kindly reminder: The interior of the charging dock pins, the down-view
sensor and the bumper all contain sensitive Electronic components, please
use a dry and soft cloth when cleaning, and do not use a wet cloth, to
prevent damage caused by water.
Clean the charging dock pins
Clean the down-view sensor
Clean drive wheels and universal wheel
If you do not use the robot for a long time, please fully charge the robot
before storing it and before storing it completely shut it down / turn it o.
It is still recommended even when not using the robot to charge it every 3
months to maintain the battery life. If the battery is over discharged or is
not used for a long time, the robot may not be able to be charged. Please
contact our company for after-sales maintenance do not disassemble it
yourself.
10. MAINTENANCE | CHARGING DOCK PINS | DOWN VIEW SENSOR | DRIVE WHEEL AND UNIVERSAL WHEEL
To Next Page
Loading...
