Rolling Brush Side brush
Dust bin Filter cover cleaning
Filter cleaning
Mopping module
2 in 1 electrically-controlled water tank
Sensors
Regular cleaning
Sensors
Monthly cleaning
Battery Firmware upgrade
System reset
DAILY MAINTENANCE
Rolling brush
1. Turn over the machine and press the buckle on the rolling brush
cover to take out the rolling brush.
2. Remove dust outside and inside the rolling brush using a tiny
brush and clean the rolling brush.
3. Reassemble the rolling brush and press the rolling brush and the
rolling brush cover tightly to completely close it again.
Clean it regularly
Clip
Main brush
To Next Page
Loading...
