Rolling Brush Side brush
Dust bin Filter cover cleaning
Filter cleaning
Mopping module
2 in 1 electrically-controlled water tank
Sensors
Regular cleaning
Sensors
Monthly cleaning
Battery Firmware upgrade
System reset
DAILY MAINTENANCE
Side brush
1. Turn over the machine and pull the side brush out and
upwards.
2. Remove hair and dirt and reassemble the side brush.
3. Make the left-side brush (L) and the right-side brush (R)
correspond to L and R on the bottom casing, press L and R to
reinstall them..
Clean it regularly
Replace the side brush every 3-6 months for the best cleaning effect
L
(left side brush)
R
(right side brush)
To Next Page
Loading...
