Filter cover
Dustbin button
Wall sensor
LDS laser ranging sensor
Anti-collision sensor for radar
Anti-collision sensor
Infrared recharging sensor
PRODUCT INTRODUCTION
Sensors
Clean it regularly
Maintenance
Clean the sensors with a dry, soft cloth, including:
1. The sensors along the sides of the robot.
2. Three anti-dropping sensors at the bottom of the robot.
3. Infrared avoidance sensor in the front of the robot.
4. Radar avoidance sensor on the top of the robot.
5. Electric shock protector and charging base shrapnel at the
bottom of the robot (please cut the power off during cleaning).
6. Signal transmission area of charging base.