Charging contact
points
Universal wheel
Side brush
Battery cover
Rolling brush
Rolling brush
cover
Anti-drop sensor
Driving wheel
PRODUCT INTRODUCTION
Anti-drop sensor
Clean it regularly
Maintenance
Clean the sensors with a dry, soft cloth, include:
1. The sensors along the side of the robot.
2. Three anti-dropping sensors at the bottom of the robot.
3. Infrared avoidance sensor in the front of the robot.
4. Radar avoidance sensor on the top of the robot.
5. Electric shock protector and charging base shrapnel at the
bottom of the robot (please cut the power off during cleaning).
6. Signal transmission area of charging base.
Anti-drop sensor