34
Settings
[Confi g dispay]
Function
Display
Settings of various display functions
Brightness
Brightness setting
Auto (Sensor)
The brightness of the display adjusts automatically
to the ambient light conditions.
Fix 20% … Fix 100%
The brightness value is permanently set to xx%
(xx = 20 | 40 | 60 | 80 | 100)
Standby
Activation of the Standby mode
Off
The display always remains active and is not switched off
10 sec. … 120 sec.
After xx seconds, the display switches to Standby mode
(xx = 10 | 20 | … | 110 | 120), display dark, button
illumination switched on, switches on again with a
phone call or the event selected in "Switch-on"
Switch-on
Criteria for switching on the display again from Standby mode
Press button +
display update
Display switches on after pressing the button or changing
the display content, e.g. playback of next track
Press button
Display switches on after pressing the button
or turning the rotary button
Scroll mode Display of texts that are longer than one line
Continuous
Text is being fed through continuously
Once
Text is fed through once, then the fi rst part
of the text is permanently displayed
Off
First part of text is permanently displayed
To Next Page
Need help?
General
