Function
Key Features
A. On/Off
1. Power ON
Long press Power key to switch ON DVR and enter video mode. Short press the same key to
start recording. When the DVR is connected to the 12V charger in the vehicle, it will AUTO
commence recording when the ignition is turned ON. Once the ignition is turned OFF the DVR
will automatically save the last file and shut down.
Note: Upon turn ON, the display screen will show 'PLEASE INSERT SD CARD' in case a mSD card
is not inserted. Please insert mSD card once the DVR is in OFF condition
2. Power Off
Long press the power key to switch OFF DVR while it is in either STANDBY or ON mode.
Note: When the built-in battery is close to being drained out, the DVR display will show a 'Low
Battery' warning and switch OFF. It automatically saves the last file before it shuts down.
B. Battery Charging
With 12V car charger (provided)
BP 4.0 - FHD
Note: While the DVR is plugged in to the
12V Charger, the charging indicator will
glow a steady RED. Once it is fully charged,
the charging indicator will switch OFF.
C. Inserting mSD Card
It is recommended that while inserting the mSD card into the provided
slot, no force is to be applied. Once it is determined that the mSD card has
been inserted the correct side, we suggest that the card be pushed down
till it locks into position in the slot.
Removing mSD card: Briefly push down on the top of the mSD card until it
is released from it's locked position and then pull it out (It is suggested to
remove the mSD card when the DVR is in OFF mode)
1. Zinc alloy metal housing
2. 2.0' IPS screen with better display quality
3. Full HD 1080P recording (front camera)
4. Detachable HD 720P in-cabin lens with
plug and play design
5. Photo capture, Playback, Automatic
Recording with ignition turn on
6. Supports G-sensor, motion detection,
loop recording
7. Car number display In the video
8. Supports parking monitoring
9. Support night vision with 6pcs IR lights
10. CE & ROHS certified
To Next Page
Loading...