Blaupunkt BPPT-001 - Technical Data; Battery Charger; Battery Cell

Wear hearing protection while operating the power tool.
The declared vibration total value has been measured in accordance with a standard test method and may be used
for comparing one tool with another. The declared vibration total value may also be used in a preliminary assessment
of exposure.
Warning
The vibration emission during actual use of the power tool can di󰀨er from the declared total value depending on the
ways in which the tool is used. There is the need to identify safety measures to protect the operator that are based
on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such
as the times when the tool is switched o󰀨 and when it is running idle in addition to the trigger time).
Technical Data
Rated Voltage
Model
No-load Speed
Range of Drill Bit sizes
Sound pressure level
Sound power level
Weight:
Battery cell
Battery charger
Declaration of the
vibration emission
according to EN 60745
(considered
uncertainty 1.5 m/s2)
DC 10.8V
BPPT-001
0-350/0-1300 min-1
0.8-10mm
85 dB(A)
96 dB(A)
1,10 kg
3.7V 1300mAh
INPUT: AC100-240V 50-60Hz
SS1002-048135-W2E-D-C
OUTPUT: 13.5VDC 350mA
Drill mode: 1.09 m/s2
Screwdriver without drill mode:0.936m/s2
Declaration of the noise emission values according to EN 60745 (considered uncertainty 3 dB)
5
EN