14
CONFIGURATION (Cont.)
Dual Alarm
1. Press the ALARM button located at the front of the unit.
2. You can now see ALARM 1 and ALARM 2 are currently set to OFF.
3. Set one or both alarms at dierent times:
- Select either ALARM 1 or ALARM 2 via turning the
TUNE/SELECT dial and pressing down on the dial to select.
- Select Turn on
- Repeat: Everyday (select to choose more options
other than everyday).
- Time: select the time of day you want the alarm to occur.
- Sound: choose the tone you want to occur when
alarm sounds.
4. NAP Alarm - Set a short alarm for a certain amount of
pre-selected times.
Equaliser
This feature enables you to choose a sound equalization profile. Each of
the equalization setting will change the tone of the sound from your radio
when selected.
1. Press MENU button - Configuration–Equaliser– press
TUNE/SELECT dial to confirm.
2. Turn TUNE/SELECT dial and then press it to select a profile
through Normal, Flat, Jazz, Rock, Soundtracks, Classical, Pop,
News and My EQ.
3. To set up My EQ, select “My EQ ”, and then press TUNE/SELECT
dial to confirm. Press “right arrow” button to select Bass,
Treble. Turn the TUNE/SELECT dial to change the value of Bass,
Treble and then press TUNE/SELECT dial to confirm.
Reset to default
Doing a factory reset clears all user defined setting, replacing them with
the original default values, so time/date, DAB station list and preset fav
stations are all lost.
1. Press MENU button - Configuration - Reset to Default – press
TUNE/SELECT dial to confirm.
2. Turn TUNE/SELECT knob to select “YES”, and then press
TUNE/SELECT dial to confirm.
To Next Page
Loading...
