8
GETTING STARTED
Positioning your Radio
Place your radio on a flat/stable surface that is not subject to vibrations.
Adjusting the Antenna
Extend the antenna to ensure you receive the best reception possible in both DAB and FM
radio modes. It may be necessary to adjust the position of the radio and /or antenna to
achieve the best signal.
Turning the unit On/O - For Battery and Power Adaptor Cable
Connect the plug at the end of power adapter cable to the DC IN socket on the rear of unit.
Then insert the power adapter into the mains socket. The unit will turn on.
Press /POWER button to switch unit standby.
To wake radio up from Standby mode (clock display), press and hold
MENU button.
Radio Auto-standby
To avoid unnecessary energy consumption, the radio will automatically go to standby after 15
minutes if the radio isn’t playing any program/track.
In battery mode, to save the battery consumption, it suggests manually go to standby mode
by long pressing the “MENU“ button in 3 seconds. You can also long press “MENU” button by
3 seconds to exit the standby mode.
Automatically Setting the Clock
The clock can be set and updated automatically if are connected to the internet or receive
DAB/FM signals in your location. In order for the clock to synchronise to the current local time
you must leave it on an Internet Radio, DAB or FM station for a short period of time.
To Next Page
Loading...
