19
Bluetooth®
• If the spoken name is not being recognised
or the time for the voice recognition has
already expired, the display brie y shows
"DIAL FAILED".
• You can cancel the voice recognition by
pressing the 5
button
=
.
• Please note that the duration of the voice
recognition is limited and depending on
the respective cell phone.
• You can also activate the voice recognition
via speed dial (see the section "Speed dial
for voice dial" in this chapter).
Storing a phone number in the car sound
system
You can store phone numbers in the car sound
system and make calls using the speed dial (see
the following section).
A phone number is stored for the currently con-
nected telephone and is available only for this tel-
ephone. The car sound system can store up to ve
numbers for up to ve paired devices.
쏅 Enter the phone number as described in the
section "Making a call".
쏅 Press the desired memory button 1-5
=
for
approx. 2 seconds to store only the number.
- or -
쏅 Press the
button
7
for approx. 2 seconds
to enter a name for the entry.
You can now enter a name with up to 15 char-
acters:
쏅 Turn the volume control
4
to select a char-
acter for the respective position.
쏅 Press the
or button
7
to reach the next
or previous position.
Note:
You can also reach the next position by press-
ing the ON/O button
3
.
쏅 Press the desired memory button
1 - 5
=
for approx. 2 seconds to store the
number and name.
The display brie y shows "NUMBER SAVED".
Afterwards, you are returned to the Blue-
tooth® menu and the "DIAL NEW NUMBER"
menu item.
Notes:
• A number previously stored on the memo-
ry button is replaced.
• If a telephone is unpaired, the numbers
stored for this telephone are automatically
deleted.
Speed dial for any phone number or for the
number dialed last or a stored number
With speed dial, you can make a call without rst
having to select the corresponding function in the
Bluetooth® menu.
To call the number dialed last,
쏅 press the button
<
.
The display shows the number dialed last.
Note:
If no cell phone is currently connected, the
Bluetooth® menu is opened. The "PAIRING"
menu item is selected.
쏅 Press the
button
<
to call the number.
To call a stored number,
쏅 press the
button
<
.
쏅 Press a memory button 1 - 5
=
to call the
stored number.
Note:
If no number is stored under the selected
memory button, the display brie y shows
"NO NUMBER".
쏅 Press the button
<
to call the number.
To call any number,
쏅 press the
button
<
.
쏅 Press the On/O button
3
to open the entry
menu and enter a number (enter the phone
number as described in the section "Making
a call").
쏅 Press the
button
<
to call the number.
To Next Page
Loading...
