Blaupunkt CRP10BK - TIME AND ALARM SETTINGS; SETTING TIME, FORMAT, AND SNOOZE; SETTING ALARM 1; SETTING ALARM 2

CRP10BK
Insert the holder to the bottom of the outdoor transmitter for desktop or insert it to the back
of the transmitter for wall mount purpose.
SETTING TIME, 12/24HR TIME AND THE SNOOZE DURATION
1. Press and hold SET once, the hour digits flash. Press or to set the current hour. Press
and hold or to accelerate setting at high speed.
2. Press SET again, the minute digits flash. Press or to set minutes. Press and hold
or to accelerate setting at high speed.
3. Press SET again, the display shows “24H” and flashes. Press or to select “12H” or
“24H” time format.
4. Press SET again, the display shows “05” and flashes. Press or to select your snooze
time from 5 to 60 minutes.
5. Press SET again or if no key pressed for approx. 10 seconds to exit the setting mode.
Note: when 12-hour time format is selected, the PM icon will appear on the upper left time
display to indicate the afternoon time; there is no AM indicator.
TO SET ALARM 1
1. At normal time display, press SET once 6:00 and appear.
2. Press and hold SET until the hour digits flash. Press or to set the desired hour.
Press and hold or to accelerate setting at high speed. PM will appear on the
display to indicate afternoon time if 12-Hr format is selected. There is no AM indicator.
3. Press SET once again, the minute digits flash. Press or to set desired minutes.
Press and hold or to accelerate setting at high speed.
4. Press SET once again, LCD displays “bu” (buzzer). To select wake to sound sources, press
or to select :-
bu = wake-by-buzzer
rd = wake-by-radio
5. Press SET again to complete set-up. If no key is pressed in approximate 10 seconds at any
time during set-up, the clock will exit the alarm set-up mode.
TO SET ALARM 2
1. At normal time display, press SET twice, 6:00 and appears.
2. Press and hold SET until the hour digits flash. Press or to set the desired hour.
Press and hold or to accelerate setting at high speed. PM will appear on the
display to indicate afternoon time if 12-Hr format is selected. There is no AM indicator.
3. Press SET once again, the minute digits flash. Press or to set desired minutes.
Press and hold or to accelerate setting at high speed.
4. Press SET once again, LCD displays “bu” (buzzer). To select wake to sound sources, press
or to select :-
bu = wake-by-buzzer
rd = wake-by-radio
5. Press SET again to complete set-up. If no key is pressed in approximate 10 seconds at any
6