36
Traffic information
reception
Switching traffic information
priority on/off
➮ Press TRAF ?.
Traffic information priority is activated
when the traffic congestion symbol lights
up in the display.
Note:
You will hear a warning beep
● if you leave the reception area of
the traffic information station you
are tuned into.
● if you are listening to a CD, leave
the reception area of the traffic in-
formation station you are tuned into
and the seek tuning function is un-
able to find another traffic informa-
tion station.
● if you switch from a traffic informa-
tion station to a station which does
not broadcast traffic information.
Then either switch off traffic information
priority or switch to a different traffic in-
formation station.
Adjusting the volume for traffic
announcements
➮ Press MENU 8.
➮ Press : repeatedly until “TA
VOLUME” appears in the display.
➮ Press : to adjust the traffic
announcement volume.
➮ Once you have adjusted the set-
ting, press MENU 8 or OK ;.
TRAFFIC INFORMATION RECEPTION
To Next Page
Loading...
