EasyManua.ls Logo

Blaupunkt FREIBURG 130 - Configuring Audio Settings; Bass, Treble, and Balance Adjustments; Fader, X-Bass, and Presets Configuration

Blaupunkt FREIBURG 130
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
Calling and exiting the "AUDIO"
menu
Brie y press the MENU
2
button to open
the user menu.
Turn the volume control
4
until the "AUDIO"
menu item is selected.
Press the On/O button
3
to open the
"AUDIO" menu.
Turn the volume control
4
until the desired
menu item is selected.
Perform the setting (see the next section).
Brie y press the MENU button
2
to exit the
menu.
Notes:
The menu is automatically exited approx.
16 seconds after the last button activation
and you are returned to the display of the
current audio source.
In the menu, you can press the button
7
in each case to return to the higher
menu level.
The menu does not allow changing the
volume or muting (Mute) the car sound
system.
Making settings in the "AUDIO"
menu
BASS
Bass level. Settings: –7 to +7.
Press the On/O button
3
to change the
setting.
Turn the volume control
4
until the desired
level is set.
TREBLE
Treble. Settings: –7 to +7.
Press the On/O button
3
to change the
setting.
Turn the volume control
4
until the desired
level is set.
BALANCE
Left/right volume distribution. Settings: L9 (left)
to R9 (right).
Press the On/O button
3
to change the
setting.
Turn the volume control
4
until the desired
volume distribution is set.
FADER
Front/rear volume distribution. Settings: R9 (rear)
to F9 (front).
Press the On/O button
3
to change the
setting.
Turn the volume control
4
until the desired
volume distribution is set.
X-BASS
Increase of bass at low volume. Settings: ON, OFF.
Press the On/O button
3
to change the
setting.
Turn the volume control
4
to change be-
tween the settings.
PRESETS
Selecting equalizer presettings. Settings: POP,
ROCK, CLASSIC, EQ OFF.
Press the On/O button
3
to change the
setting.
Turn the volume control
4
to change be-
tween the settings.
AMP DELAY
Setting the delay with which a connect ampli er
is switched in.
Settings: 0.5/1.0/1.5/2.0/2.5 seconds
and OFF (no delay)
.
Press the On/O button
3
to change the
setting.
Turn the volume control
4
until the desired
delay is set.
Sound settings

Table of Contents

Related product manuals