17
DIM DAY/DIM NIGHT
Setting the display brightness for the day (DIM
DAY) or the night (DIM NIGHT). Settings: 1 – 16.
쏅 Press the On/O button
3
to change the
setting.
쏅 Turn the volume control
4
to set the desired
display brightness.
SCROLL
Select the display of scrolling text (e. g. when
displaying MP3 le names) either as single display
or continued display. Settings: 1X (single display),
ON (continued display).
쏅 Press the On/O button
3
to change the
setting.
쏅 Turn the volume control
4
to change be-
tween the settings.
Making settings in the "VOLUME"
menu
ON VOLUME
Setting the power-on volume. Settings: 1 – 50.
쏅 Press the On/O button
3
to change the
setting.
쏅 Turn the volume control
4
to set the desired
power-on volume.
LAST VOL
If you select the setting LAST VOL, every time you
switch on the radio, the volume level that was set
the last time you switched the radio o is activated
again. Settings: ON, OFF.
Danger!
High volume
The power-on volume can be unex-
pectedly high if the LAST VOL setting is selected
and a high volume was set the last time the radio
was switched o .
Always set the device to a moderate volume.
쏅 Press the On/O button
3
to change the
setting.
쏅 Turn the volume control
4
to change be-
tween the settings.
TA VOLUME (tra c announcement volume)
(only for reception area EUROPE)
Setting the minimum volume for tra c announce-
ments. Settings: 1 – 50.
쏅 Press the On/O button
3
to change the
setting.
쏅 Turn the volume control
4
to set the volume.
BEEP
Switching the con rmation beep on or o . Set-
tings: ON, OFF.
Note:
When storing radio stations, a con rma-
tion beep sounds even if the OFF setting is
selected.
쏅 Press the On/O button
3
to change the
setting.
쏅 Turn the volume control
4
to change be-
tween the settings.
Making settings in the "CLOCK"
menu
CLK DISP
Switch the permanent display of the time on or o .
Settings: ON, OFF.
쏅 Press the On/O button
3
to change the
setting.
쏅 Turn the volume control
4
to change be-
tween the settings.
If the permanent display of the time is switched
on, the time is shown on the display. The display
of the respective audio source is shown only after
pressing a button. Approximately 16 seconds after
the button is pressed last, the time is displayed
again.
User settings
To Next Page
Loading...
