To Next Page
A
aaron42Aug 1, 2025
How to fix Blaupunkt GT1000 line that won't advance?
- TTimothy BeanAug 2, 2025
If the line on your Blaupunkt Trimmer isn't advancing, there could be several reasons. First, the line might be welded to itself, in which case you should lubricate it with a silicone spray. Second, there might not be enough line on the spool, so you should install more line. Third, the line might be worn too short; try pulling the lines while alternately pressing down on and releasing the bump button. Finally, the line could be tangled on the spool, so remove the line from the spool and rewind it.
General
