To Next PageTo Next Page
Need help?Do you have a question about the Blaupunkt GTA 250 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Max power | 250 W |
| Power Output (Peak) | 250 W |
| Frequency response | 20 Hz - 20 kHz |
| THD | < 0.05 % |
| Lowpass filter | 50 Hz - 250 Hz |
| Highpass filter | 50 Hz - 250 Hz |
| Inputs | RCA |
| Amplifier Class | Class AB |
| Bass Boost | 0 - 12 dB |
| RMS power @ 4 ohms | 2 x 50 Watts |
| Power Output (RMS) | 50W x 2 @ 4 ohms, 75W x 2 @ 2 ohms |
| Signal-to-noise ratio | > 90 dBA |
Welcomes user, highlights product quality, recommends professional installation, and warns about hearing safety.
Details essential safety steps for amplifier installation, fuse usage, and battery disconnection.
Guides on choosing an installation location and connecting cables, including impedance and cross-section requirements.
Lists key technical data such as power output, frequency response, signal-to-noise ratio, and dimensions.
Explains correct positive/negative cable connection, grounding, and cable cross-section requirements.
Details connecting the remote for radio switching and adjusting the input sensitivity Level control.
Emphasizes correct polarity for loudspeaker connections for optimal bass reproduction.
Explains bridging for mono configuration, ideal for subwoofers or midrange speakers.
Details selecting crossover type (low-pass/hi-pass) and frequency for optimal speaker range.
Describes the Bass Boost control and explains the meaning of the Power and Protection indicator lamps.
