To Next PageTo Next Page
Need help?Do you have a question about the Blaupunkt MPA680 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| RMS Power @ 4 Ohms | 80W x 4 |
| THD | <0.05% |
| Signal-to-Noise Ratio | >90dB |
| Input Sensitivity | 200mV - 6V |
| Low Pass Filter | 50Hz - 250Hz |
| Fuse Rating | 25A |
| Bass Boost | 0 - 12dB |
| Weight | 2.3 kg |
Detailed performance metrics for the amplifier, including power output and distortion.
Highlights the important features and capabilities of the MPA series amplifier.
Crucial warnings and tips to prevent vehicle damage and fires during installation.
Lists essential hand and power tools required for amplifier installation.
Covers fusing, power, speaker wiring, and final routing for amplifier installation.
Explanation of low-pass, high-pass, and input gain controls for channels.
Details on low-level and high-level RCA and speaker input connections.
How to connect the +12V power, ground, and trigger lines to the amplifier.
Importance and placement of the amplifier's internal fuse.
Instructions for connecting loudspeakers to the amplifier's output terminals.
Diagnoses and resolves common problems like no power, no sound, noise, and overheating.
