Need help?Do you have a question about the Blaupunkt GTA 4 SPEZIAL and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Max Power | 1000W |
| Frequency Response | 10Hz - 30kHz |
| THD | <0.05% |
| Input Sensitivity | 0.3V - 8V |
| Lowpass Filter | 50Hz - 250Hz |
| Highpass Filter | 50Hz - 250Hz |
| Signal-to-Noise Ratio | >90dB |
Congratulations on your purchase of a high-quality GTA power amplifier.
Important safety instructions for installation, including fuse placement and battery disconnection.
Advice on professional installation versus self-installation for optimal performance.
Details on connecting speakers in various modes (Quadro, Stereo) and power ratings.
Guidance on connecting positive and negative cables to the battery and ground point.
References to figures illustrating power supply, radio, and loudspeaker connections.
Explanation of the Level control for input sensitivity adjustment and its function.
Essential information on connecting amplifier and speaker terminals with correct polarity.
Selecting crossover type (low-pass/high-pass) and frequency for speaker matching.
Illustrates the physical mounting and placement of the amplifier.
Diagram shows power input, remote connection, and fuse placement.
Details on front/rear input level controls and crossover frequency adjustments.
Wiring diagram for connecting loudspeakers with a minimum impedance of 2 Ohms.
Shows alternative wiring for connecting loudspeakers with a minimum impedance of 2 Ohms.
Illustrates connecting multiple speakers in bridged mode with a 2x2 Ohm minimum load.
Wiring diagram for connecting speakers in bridged mode with a minimum impedance of 4 Ohms.
Provides phone and fax numbers for service support in various countries.
To Next Page