Blaupunkt HAMBURG MP57 - Answering;rejecting a phone call; Making a call (DIAL NEW)

.... Press the rocker switch /\ or v @
repeatedly until "UNPAIR" or "UNPAIR
ALL" appears on the display.
.... To initiate the unregistration process,
press the rocker switch> @.
The unregistration process is confirmed
with "UNPAIRED".
Note:
The "UNPAIR" function is active only if
the car sound system is currently con-
nected with the cell phone to be unreg-
istered.
Answering/rejecting a phone call
If you are receiving a call, the display shows
"INCOMING CALL" and the phone number of
the caller. The active audio source is muted
and the ring tone is sent to the loudspeak-
ers.
In case of an incoming call, you must answer
or reject the call. At this time, it is not possi-
ble to perform another operation using the
car sound system.
To reject the call:
.... Press the ..... button 0.
The display shows "CALL ENDED".
To answer the call:
.... Press the ~ button (]).
The display shows "IN-CALL".
Your caller's voice is broadcast via the loud-
speakers.
Bluetooth phone call
During the phone call, you can change the
volume by means of the volume control 0.
Note:
To answer/reject calls, use only the de-
scribed buttons of the car sound sys-
tem.
If you use the corresponding buttons of
the phone, the behaviour of the radio
may differ from phone to phone. The
reason is the software differences of the
cell phones.
Making a call (DIAL NEW)
There are two ways of making a phone call
via the car sound system:
• Entering a phone number
• Dialing a stored phone number (sec-
tion "Storing and calling up a phone
number")
To enter a phone number and make a call:
.... Press the MENU/OK button @.
.... Press the rocker switch /\ or v @
repeatedly until "BLUETOOTH MENU"
appears on the display .
....
Press the rocker switch> @ to open
the menu .
....
Press the rocker switch /\ or ~ @
repeatedly until "DIAL NEW" appears on
the display.
.... Press the rocker switch> @ to display
the phone number input.
39