Blaupunkt HAMBURG MP57 - User settings

User settings
Changing the scan time
(SCANTIME)
The scan time of the scan function is pre-
set for all audio sources to 10 seconds. The
scan function is not available for external au-
dio sources.
You can change the scan time in the Various
menu .
....
Press the MENU/OK button @.
.... Press the rocker switch v @ until
"VARIOUS MENU" appears on the dis-
play .
....
Press the rocker switch> @ to open
the menu .
....
Press the rocker switch A or Y @ re-
peatedly until "SCAN TIME" is displayed .
....
Press the rocker switch> @ to call up
the setting .
....
Press the rocker switch 7\ or Y @ to
change the scan time.
You can adjust scan times in increments of
5 seconds form 5 to 30 seconds.
50