EN
Software update
The car radio software can be updated from external storage media.
Update instructions and further information are included with the
update. Depending on the model, updates can be obtained from
technical support or are available on the Blaupunkt homepage at
www.blaupunkt.com.
Please provide as many details about issues you encounter in your
radio as possible when requesting an update from Blaupunkt. Technical
support also requires information about the currently installed software
version (see section SETTINGS | MENU).
If the car radio is working properly, an update is not necessary; any
update also carries some risk of errors during the update. Despite careful
testing, on rare occasions new or different bugs may appear or functions
may be altered in an undesirable way.
Do not load software from external sources into the car radio, as this
may render it inoperable.
Individual components and functions of the car radio may differ from
those stated in the Manual, as features may have been changed, added or
even removed due to further software development. This is not a defect
nor a reason for complaint.
6. Switching On/Off | Adjusting Volume
Switching on/off
To switch on the unit, briefly press the button/knob.
To switch off the unit, press the button/knob and hold for one second.
Note that it may take a few seconds after turning the radio on before you
can use and turn it off again, as the internal boot processes are still active
in the background.
The radio can also be switched on with the ignition off. If so, the
display will then briefly show "1 HOUR ON".
The radio automatically shuts off after one hour to protect the vehicle
battery.
The automatic switch-off function can be deactivated if, for example, the
ignition plus is not available in the vehicle. However, this involves the risk
of the car radio draining the battery if you forget to switch it off. See
section SETTINGS | MENU.
Switching on/off by means of the vehicle ignition
If the ignition is turned off while the unit is turned on, it will automatically
turn off and turn on again the next time the ignition is turned on.
If the car radio has been turned off by pressing the volume control dial, it
will remain permanently turned off after the ignition is turned on/off until
it is manually turned on again.
If this feature does not work as described, the car radio has not been
properly wired.
To Next Page
Loading...
