Storing and selecting radio station presets
You can save your favourite stations in the station memory using the 1-5
buttons.
Each memory level can store up to 5 stations.
Set the desired station as described in STATION SEARCH. To do this, press
the memory button for more than one second, a beep will confirm that
the station has been stored. Release the button again after the beep.
By briefly pressing one of the memory buttons 1-5, you can call up a
previously stored station.
Automatic storing of presets (Travelstore)
In the memory levels marked with T (FMT, AMT), you can store up to 5
stations with the best signal strength using the automatic search
(Travelstore).
To do this, press and hold the FM source selection button for more than
one second until the display shows T-STORE.
If you run Travelstore on another memory level the system will
automatically switch to the Travelstore memory level and automatically
activate it in the settings if necessary.
Only the stations at the Travelstore memory level are saved/changed.
Playing the available stations (SCAN)
You can play all stations available in the selected frequency band.
To do this, press and hold the SRC source selection button for more than
one second until the display shows SCAN.
The display shows SCAN and the current radio frequency/station flashes.
SCAN continues until the function is cancelled by pressing any button.
Changing the display
By pressing and holding the MENU button, the display can be switched
between different information:
• Station designation
• PTY (programme type)
• Radio text
• Memory space/memory level + frequency
• Memory space/memory level + time
Availability of the specific display function depends on the selected
band, transmitter and reception quality.
More features or options:
see section SETTINGS | MENU.
To Next Page
Loading...
