11
FRANÇAIS
ENGLISH
ESPAÑOL
PORTUGUÊS
➮ In order to switch between FM
memory levels, briefly press the
FM/TS button 5.
➮ To select the AM waveband, press
the AM button ?.
Tuning into a station
There are various methods available for
tuning into a station.
Automatic station search mode
➮ Press the or button :.
The unit tunes into the next receivable
station.
Tuning into stations manually
You can also tune into stations manual-
ly.
➮ Press either the
or
buttons :.
Note:
You can only tune into stations manual-
ly if the RDS function has first been de-
activated.
Browsing through broadcasting
networks (only FM)
If a radio station provides several pro-
grammes, you have the option of brows-
ing through its so-called “broadcasting
network”.
➮ Press the
or
button : to
move to the next station on the
broadcasting network.
Note:
If you want to use this feature, the RDS
function must first be activated.
You will then only be able to switch to
stations that you have received once
already. To do so, use the Scan or Trav-
elstore function.
Setting the sensitivity of the
station search mode
You can choose whether you wish to
preset only strong or also poor-recep-
tion stations.
➮ Press the MENU button 8.
➮ Press the button : repeatedly
until “SENS” appears on the dis-
play.
➮ Press the
button :.
The display shows the currently set val-
ue for sensitivity. “SENS HI” denotes
maximum sensitivity. “SENS LO” is the
minimum. If “SENS LO” is selected, “lo”
appears on the display.
➮ Use the
buttons : to set the
desired degree of sensitivity.
➮ When you have completed the set-
tings, press the MENU button 8
or the OK buttons ;.
Storing stations
Storing stations manually
➮ Select the required memory level,
FM1, FM2, FMT or the AM wave-
band.
➮ Tune into the desired station.
➮ Hold down one of the preset station
buttons 1 - 6 > on which you wish
to store the station for more than
two seconds.
RADIO MODE
To Next Page
Loading...
