23
FRANÇAIS
ENGLISH
ESPAÑOL
PORTUGUÊS
EQUALIZER
Switching the equalizer on/off
In order to switch off the equalizer,
➮ hold down the DEQ < button until
EQ lights up on the display and
“EQ ON” appears briefy.
➮ To switch off the equalizer, hold
down the DEQ < button until
EQ goes out on the display and
“EQ OFF” appears briefy.
Setting the equalizer
➮ Press the DEQ button <.
➮ Select “DIGITAL EQ” using the
or button :.
➮ Select the filter using the
or
button :.
➮ Press the or button :.
➮ To select the frequency, press the
button :.
➮ Set the level using the or but-
ton :.
➮ To select the next filter, first press
the OK button ;, then the
or
button :.
➮ When all the settings have been
selected, press the DEQ button <.
Setting the level indicator
The level indicator (spectrometer) on
your display briefly indicates the volume,
tone and equalizer settings with sym-
bols on your display as you make the
corresponding settings.
When settings are not being made, the
spectrometer indicates the original lev-
el of the car radio.
You can also set the type of spectrome-
ter on your menu.
There are two types available.
Selecting a spectrometer type
➮ Press the MENU button 8.
“MENU” appears on the display.
➮ Press the button : repeatedly
until “EQ DISPLAY” appears on the
display.
➮ Press the
or
button : to
choose between displaying
“SPECTRUM1” and “SPECTRUM2”
or “EQ DISP OFF” set the volume
distribution left/right.
➮ Press the MENU button 8 or OK
; once you have completed the
setting.
To Next Page
Loading...
