Blaupunkt INDIANAPOLIS CD34 - Setting the Equalizer; Turn On;Off Message Edit

E-5
ENGLISH
Setting the equalizer
You can select an equalizer curve for 3 music types (Rock,
Pop, Classic).
You can store and adjust the equalizer settings for frequency
and level.
Selecting the equalizer curve
1. Each time you press the
EQ
to select the desired equal-
izer curve as follows.
ROCK
USER 1
USER 2
CLASSIC
POP
EQ OFF
Adjusting the equalizer curve
1. Press the
EQ
to select the USER 1 or USER 2.
2. Press and hold the
EQ
for more than 2 seconds to
enter the BAS/TRE adjustment mode.
3. Use the following buttons and dial to set the desired sound
characteristics.
or : To switch BAS/TRE
VOL
or : Adjust the characteristics
Tips
• When you set the USER1 or 2, the following indication on
the display remains lit.
Turn on/off message edit
You can edit the turn on/off message and store it in memory.
Following four messages can be edit with 9 characters each.
Turn-on message
• HELLO (MESG 1) / WELCOME (MESG 2)
Turn-off message
• SEE YOU (MESG 3) / GOOD-BYE (MESG 4)
1. Press the
MENU
, then press the or to dis-
play the “MESG ON” on the display window.
2. Press the
SRC
or
PWR
to flash the “HELLO”.
3. Rotate the VOL dial to select the desired message you
want to edit.
HELLO ➜ WELCOME ➜ SEE YOU ➜ GOOD- BYE
4. Press the
SRC
or
PWR
, then enter the character.
A. Rotate the VOL dial in a clockwise direction to select
the desired characters.
(A➜ B ➜ C ➜ ...Z➜
<➜ >➜ ∗➜ +➜
′
➜ −➜ .➜ /
➜0➜1➜2➜3...9➜“ ”Space )
B. Press the
or to move the flashing cur-
sor.
C. Repeat steps A. and B. to complete entering the en-
tire message 9 characters max.
5. Press the
SRC
or
PWR
to store the message.
The new message flashes and automatically returns to
previous indication.
Tips
• To erase /correct a message, press the
MENU
for more than
2 seconds to clear the character and re-enter.
• If you make no button input or dial operation in 30 seconds,
the message edit mode will turn off automatically.
• Make sure the “MESG” will be “ON” .
• When entering a name, pressing the following buttons af-
fects the display of characters as follows.
: Changes to inputting letters. (Starts with “ A ”.)
: Changes to inputting numbers. (Starts with “ 0 ”.)
: Changes to inputting characters. (Starts with “ < ”.)
: Enters a space (blank).
Erasing the turn on/off message
You can erase the turn on/off message if so desired.
1. Press the
MENU
, then press the or to dis-
play the “MESG ON” on the display window.
2. Press the
SRC
or
PWR
, then rotate the VOL dial to se-
lect the desired message you want to erase.
3. Press the
SRC
or
PWR
, then press the
MENU
for more
than 2 seconds.
4. To return to the previous indication, Press
MENU
.
Repeat steps 2. and 3. if you want to erase other mes-
sage.
INDIANAPOLISbody-01Eng 03.11.21, 1:48 PM5