IR 18e
Configuration
To change user settings scroll to Configuration and press ENTER.
1. Network
Network Management
Main Menu → Configuration → Network → ENTER
1-1 Wireless Network Configuration
Here you can search networks automatically. The network list will be shown when
the search is complete, simply select your chosen network and input password if
needed.
1-2 Manual Configuration
Select Wireless to enter into settings menu.
1-2.1 DHCP(Dynamic Host Configuration Protocol)
★DHCP (On) Dynamic Host Configuration Protocol (on)
Select this item to detect a wifi network IP address and connect automatically.
★DHCP (Off ) Dynamic Host Configuration Protocol (off)
Select this item to turn off the wifi detection and change it to a manual setting mode.
1-2.2 Enter SSID
1-2.3 Manage
Manage the manual configuration. If enter into the item, you can select and delete
network history.
1-3 Check Network when Power network on/off status
Purpose for enable on: let the unit search internet stations automatically.
Purpose for disable off: skip the step of search internet stations automatically, and
move to next menu.
2. Date &Time
Menu → Date and Time → ENTER
2-1 Set Date and Time
Press ENTER button to set time and date, fill in corresponding date and time, then
press the ENTER to confirm.
53
To Next Page
Loading...
