Blaupunkt Kiel CD32 User Manual

39
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Scanning tracks (SCAN)
You can briefly play all the tracks on a
CD.
➮ Hold down the MENU button 7 for
longer than two seconds.
Note:
● You can set the scantime. For fur-
ther details, read the section enti-
tled “Setting the scantime” in the
“Radio mode” chapter.
Stopping SCAN and continuing
playback
To stop scanning,
➮ briefly press the MENU button 7.
The current track will then continue to
be played.
Repeating tracks (REPEAT)
If you want to repeat a track,
➮ press button 4 (RPT) :.
RPT appears in the display. The track is
repeated until you deactivate RPT.
Cancelling REPEAT
If you want to cancel the repeat func-
tion,
➮ press button 4 (RPT) : again.
RPT disappears. Normal playback is
then continued.
Pausing playback (PAUSE)
➮ Press button 3 ( ) :.
“PAUSE” appears in the display.
Cancelling pause
➮ Press button 3 ( ) : while in
pause mode.
Playback is continued.
Changing the display
To switch between the track number dis-
play and the track number / playing time
display,
➮ Press the MENU button 7.
➮ Keep pressing the or button
5 until “CD DISP” appears in the
display.
➮ Press the button 5.
The current setting is displayed. “TIME”
for the playing time display and “PLAY”
for the track number display.
➮ Press the button 5 to select the
required setting.
➮ Press the MENU button 7 twice.
Removing the CD from the unit
To remove the CD from the unit,
➮ keep the SRC button 6
pressed until the CD is ejected.
CD MODE

Blaupunkt Kiel CD32 Specifications

General

Brand	Blaupunkt
Model	Kiel CD32
Category	Car Stereo System
Language	English