44
Proceed as follows:
Select DSC programming mode.
• Press DSC.
• Press
/ to select CDC_NAME.
• Press << >> to select the number or
name (if you know it) of the CD you want
to name.
• Press
/ to confirm your selection.
• Press << >> to switch to the editing
mode. If the CD you have selected does
not already have a name, 7 dashes "_"
will appear in the display.
• The cursor will flash at its current positi-
on. Press << >> to move it.
• Press
/ to select the character you
want to enter. Select a dash "_" to leave
a blank space.
• Press DSC to store the name. The main
CDC_NAME menu will appear again in
the display.
If you want to alter a name which has al-
ready been entered, select that name in the
DSC mode and overwrite it in the editing
mode. If you want to change individual let-
ters only, press << >> to move the cursor
to the corresponding position and change
that letter.
Deleting CD names
Deleting one CD name
Proceed as follows:
Select DSC programming mode.
• Press DSC.
• Press
/ to select CDC NAME.
• Press << >> to select the name you want
to delete.
• Press
/ to confirm your selection.
• Press DSC and hold it down. After 2 se-
conds you will hear a beep and "ONE
NAME" will appear in the display.
• Release DSC after 2 seconds but befo-
re 8 seconds. "DELETED" will appear
in the display.
• The name of this CD has now been de-
leted. The main CDC NAME menu will
appear again in the display.
Deleting all CD names
All of the CD names stored in the CD chan-
ger will be deleted.
Select DSC programming mode.
• Press DSC.
• Press
/ to select CDC NAME.
• Press << >> to select the name.
• Press DSC and hold it down. After 2
seconds and after 8 seconds you will
hear a beep respectivly "ONE NAME"
and then "ALLNAMES" will appear in the
display.
• Release DSC. "DELETED" will appear
in the display. The names of all of the
CDs have now been deleted. The main
CDC NAME menu will appear again in
the display.