LS 215e
Soundbar installation.
The Soundbar have detachable design, which means tabletop, floor-standing and wall-
mounting is available for playing.
1. Play the Soundbar on table.
A. Follow up the Photo 1 to assemble the left and right speaker of Soundbar with the
adaptor. Be sure the connection will joint firmly.
B. Tighten the connection by screws from rear side.
C. Mount the Soundbar feet carefully and put the Soundbar on the table. After you
connect the Soundbar with subwoofer and audio device per follow up instruction manual
page 12, then you can enjoy the music entertainment.
Note:
A.The Soundbar is super slim design that is suitable for most TV. Please try to adjust the
height to match your TV.
B. You also can vertical place the Soundbar on the table, please reference Photo 2 and
Photo 4 for connection.
2. Play the Soundbar on floor.
A. Follow up above instruction to vertical assemble the left and right speaker of Soundbar
with the basement separately. Please make sure the speaker joint with the basement
tightly.
B. Tighten Soundbar with screws from rear side. Then put the Soundbar on floor as
Photo 5 in next page.
C. Connect Soundbar with subwoofer with speaker cable, and adjust the speaker cable
properly. Then you can enjoy the music entertainment. Please reference page 50 for
connection.
Photo 1 Photo 2
Photo 3 Photo 4
47
To Next Page
Loading...
