27
Madrid RCM 105 (Inland)
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES
NEDERLAND
ESPAGÑOL
SVENSKA
FRANÇAIS
Sampling stations briefly with
Radio Scan
Starting with the currently played station, you
may let the system sample the following ones
one after another. Choose the desired
SCANTIME in the DSC menu.
To activate Scan:
• Press SCA.
The sampled frequency or the station
name starts flashing in the display. Du-
ring the actual search process, “SCAN”
is flashing.
To continue listening to a sampled sta-
tion or to switch Scan off:
• Press SCA.
If no station is selected during the search
operation, the scan function will be automa-
tically switched off after the entire frequency
band has been passed through. The radio
will then return to the initial station that was
being played when the scan function was
activated.
For more information, please also refer to
chapter “DSC programming - SCANTIME”.
Sampling stored stations briefly
with Preset Scan
With this function you can briefly sample all
preset stations. Choose the desired SCAN-
TIME in the DSC menu.
• Press PS.
The radio will briefly play all the stored
stations one after another.
The system will sample the stations of one of
the memory banks I, II, or T, depending on
which bank was selected before. Free preset
buttons will be skipped.
To switch off Preset Scan:
• Press PS once again.
The radio will continue to play the cur-
rently sampled station.
To Next Page
Loading...
