9
MC60BT
POWER SOURCE
This unit is designed to operate on AC electrical systems.
AC OPERATION
Plug one end of the power cord into the AC power input on the unit; plug the other end into a
household AC outlet.
BASIC FUNCTION TURNING THE UNIT ON/OFF
Connect the Left and Right speaker cable to the L/R socket and connect the FM wire to the FM
ANT. socket on the rear cabinet. Press the POWER button on unit or remote control to turn the
unit on or off.
ESD hints – The product maybe reset or not reset to operation of control due to electrostatic
discharge, just switch off and reconnect again.
SETTING THE SOURCE MODE
To change the function mode, press the SOURCE button on the unit (RADIO / CD / USB / BT / AUX).
ADJUSTING THE VOLUME
Rotate the VOLUME dial on unit or VOL.+/VOL.- keys on remote control to increase or decrease
volume.
EQUALIZER (EQ) FUNCTION
This unit has a built-in equalizer system, Press the EQ/ID3 button on unit or remote control during
playback to select a setting that best matches the music style: FLAT, CLASSIC, ROCK, POP and
JAZZ.
ID3 System
This unit has a ID3 system, if the mp3 file is“ID3” format, it will automatically search the
information of “TITLE NAME” “ARTIST NAME” and ”ALBUM NAME” to show on the display. To turn
off the show tag system, press and hold the EQ/ID3 button and the unit will back to normal display.
DISCO LIGHT
To change the disco light effects, press the DISCO-LIGHT button on unit or remote control. You
can choose from five different modes.
To disable the disco light, press the DISCO-LIGHT button on unit or remote control until the
display reads “OFF”.
TITLE NAME ARTIST NAME ALBUM NAME
To Next Page
Loading...
Need help?
General
